Neutrik Speakon 2 Pole Chassis Receptacle

Neutrik Speakon 2 Pole Chassis Receptacle
Price: $1.97 per EA
Quantity Discounts
Quantity Final Price
50 to 99 $1.81 perEA
100 Or More $1.76 perEA
Manufacturer Part Number: NL2MP
Weight: 0.0100 lbs

E-mail this product to a friend E-mail this product to a friend

Found a lower price?
2 pole chassis connector. D-size flange. Does not intermate with the 4-pole cable connector.
  • Electrical Rated current/contact: 30 A rms continous, 40 A rms 1 min. Dielectric strength: 4kV peak Rated voltage: 250 V ac Contact resistance: = 3 m (= 10 m for NL4MD-H) after 5000 insertion-withdrawal operations Insulation resistance - initial: > 2 G - after damp heat test: > 1 G Inrush/outrush current capability (12 V source): 300/30 A/200 ms Creepage distance: according to IEC 664-1
  • Mechanical - Chassis: flat tabs for FASTON 0.187" x 0.02" (4.8 mm x 0.5 mm) orPCB-version with pins 1.6 mm x 0.5 mm (FASTON is a trademark of AMP Inc.)
  • Materials Contacts: Female: CuZn39Pb3 Male: CuSn8, 4 ╡m Ag plated Housing: PA 6 30% GR Metal insert: Ck67 Temperature range: -30░C to +80░C WIRING Amplifier Stereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2- Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1- Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2- BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2- Cable Stereo("HIFI"): NL4FC on amplifier end, four conductor cable splits into two pairs with NL4FC on each end Power ("PA) Standard: a two-conductor cable for each channel with NL4FC on both ends Bridged mono:

  • Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

    There are no comments for this product.