WSE Compression Tool for Fixed Pin WSE BNC F RCADescription:
HAVHPT6590WS - COMPRESSION TOOL FOR WSE CONNECTORS
Hybrid Pocket Tool for Mini RG59, RG59 and RG6 Fixed Pin Connectors
Usage:
1. Use the appropriate 1/4" x 1/4" cable strip tool for the cable being terminated. Push the connector onto the cable by utilizing the appropriate integrated insertion port located on the front of your HPT tool.
2. Release the latch on the tool lever, allowing the lever to swing open so that you are able insert the connector and cable.
3. Insert the connector into the plunger tip and push the cable down through the 360 degree connector support dogs. Start to close the handles of the tool together. As the handles close, the plunger slides toward the dogs. When the handles are fully closed together, the connector has been terminated.
4. Open handles to remove the connector. Back the connector away from the plunger slot and grasping the cable behind the connector, lift the assembly out of the tool.
NOTE: The compression throw distance is set at the factory. A hex lock nut keeps the tool calibrated over long periods of use. Field calibration, if necessary, is quick and easy. We advise periodic use of "3 in 1" oil on the plunger only.
|
|
|
|
